ElectrIQ CD12PW User Manual

ElectrIQ CD12PW User Manual

Compressor dehumidifier with digital humidistat and smart app control

Advertisement

USER MANUAL
COMPRESSOR DEHUMIDIFIER
WITH DIGITAL HUMIDISTAT
AND SMART APP CONTROL
CD12PW – 12 Litres per day
Thank you for choosing electriQ.
Please read this user manual before using this innovative dehumidifier and keep it safe for future
reference
Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals

Advertisement

Table of Contents
loading

Summary of Contents for ElectrIQ CD12PW

  • Page 1 AND SMART APP CONTROL CD12PW – 12 Litres per day Thank you for choosing electriQ. Please read this user manual before using this innovative dehumidifier and keep it safe for future reference Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals...
  • Page 2: Table Of Contents

    CONTENTS SAFETY INSTRUCTIONS VISUAL SAFETY GUIDE INFORMATION ON INDOOR POLLUTANTS APPLIANCE DIAGRAM FEATURES INSTALLATION FITTING THE OPTIONAL FILTERS CONTROL PANEL QUICK REFERENCE GUIDE OTHER FEATURES AND INDICATORS POSITIONING THE DEHUMIDIFIER WATER DRAINAGE SETTING UP THE WIFI APP CONNECTING USING QUICK CONNECTION CONNECTING USING AP MODE CONTROLLING YOUR DEVICE THROUGH THE APP SMART SCENES...
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Carefully read the instructions before Never operate this appliance if the • • operating the unit. power cord or plug is damaged. This appliance is for indoor use only Ensure the power cord is not stretched • • and is only intended for use in a or exposed to sharp objects/edges.
  • Page 4 R290 has a low GWP (Global Warming concentration of gases, solvent or other • volatile organic compounds; in very Potential) of 3. The CD12PW contains about 50g of dusty environments; in any domestic, • R290 refrigerant gas. commercial or industrial environment Do not use or store the appliance in an where the air composition is flammable.
  • Page 5: Visual Safety Guide

    VISUAL SAFETY GUIDE WHERE OR WHEN NOT TO USE YOUR DEHUMIDIFIER INFORMATION ON INDOOR POLLUTANTS VOC (Volatile Organic Compound): VOCs come from motor vehicle exhausts, gasoline vapour, pollutants such as formaldehyde, ammonia and many other common and chemical solvents such as paints and glues, or can be a by-product of mould growth.
  • Page 6: Appliance Diagram

    APPLIANCE DIAGRAM Control Panel Air Outlet Handle Humidity Indicator Light Castors Air Inlet Filter Housing Continuous Drainage Port Water Tank Power Cord OPTIONAL FILTERS HEPA FILTER (NOT SUPPLIED) CARBON FILTER Replacement filters Filters are available are available from from the retailer under the retailer under code: code: ACFIL-CDPX...
  • Page 7: Features

    App control, allowing the unit to be remote scheduled and settings to be changed from Android and IOS – great for caravans, holiday homes, museums, children rooms, offices etc. The CD12PW dehumidifier uses compressor technology to extract water from the environment. Compressor dehumidifiers are ideal for normal domestic or office environments which are heated during the winter months and maintain a temperature above 12-15⁰C.
  • Page 8: Control Panel

    CONTROL PANEL POWER Button Turn the appliance on/off POWER MODE Button Select the function of the unit between: SMART and FAN modes. The LED’s next to the button will show which mode is selected. SMART MODE: The unit will default to SMART mode the first time it is switched on and remains in this mode until another program is chosen.
  • Page 9 TIMER Button Press the TIMER button to program the timer. When the timer is activated the "TIMER" light will be illuminated. Before programming the timer, ensure the timer function has not been activated (the light must be off). The following timer programs are available.
  • Page 10: Quick Reference Guide

    QUICK REFERENCE GUIDE Power Button: Press to turn the dehumidifier on and off. Timer: Press the timer button, then use the buttons to adjust the duration of the timer (1-24 hrs, start/ stop timer). If set while the unit is running: The number will represent the number of hours the unit will operate before turning off.
  • Page 11: Other Features And Indicators

    OTHER FEATURES AND INDICATORS TANK FULL LIGHT When the water tank is full, removed or incorrectly inserted the unit will stop dehumidifying, the red tank full light will illuminate and the unit will beep. Empty the tank and reinsert it correctly to resume operation. AUTO DEFROST When frost builds up on the evaporator coils, the compressor will cycle off and the unit will go in to defrost mode.
  • Page 12: Positioning The Dehumidifier

    The handle should not be used if there is any signs of damage to its fixings. When positioning your electriQ dehumidifier, ensure that it is placed clear of any obstacle that may limit the air movement. Place the dehumidifier on a flat dry surface.
  • Page 13: Water Drainage

    WATER DRAINAGE When the water tank is full, the unit will stop automatically. When this happens the TANK FULL light will illuminate on the control panel. NOTE: Only empty the water tank when it is full or before moving or storing the unit. There are two ways to dispense collected water.
  • Page 14: Setting Up The Wifi App

    SETTING UP THE WIFI APP This is designed as a general guide to the setup. There may be differences in the interface and features available due to product development and features of the model. BEFORE YOU START • Ensure your router provides a standard 2.4ghz connection. •...
  • Page 15 REGISTER THE APP 1. Press on the register button Read the Privacy policy and 3. Enter your email address or at the bottom of the screen. press the Agree Button. phone number and press continue to register. 4. A verification code will be 5.
  • Page 16 SETTING UP YOUR HOME WITHIN THE APP TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses. As such, during the setup process the app requires that different areas are created and named to allow easy management of all your devices.
  • Page 17: Connecting Using Quick Connection

    CONNECTING USING QUICK CONNECTION Before initiating the connection, make sure the unit is in standby mode, with the WiFi light flashing twice per second. If not, follow the instructions for changing the connection mode. Ensure your phone is connected to the WiFi network. (We advise turning mobile data off during setup) 1.
  • Page 18: Connecting Using Ap Mode

    CONNECTING USING AP MODE (ALTERNATIVE METHOD) Before initiating the connection, make sure the unit is in standby mode, with the WiFi light flashing once per second. If not, follow the instructions for changing the connection type. Ensure your phone is connected to the WiFi network. (We advise turning mobile data off during setup) 1.
  • Page 19: Controlling Your Device Through The App

    CONTROLLING YOUR DEVICE THROUGH THE APP THE HOME SCREEN Add a device Choose the device to control User Profile Smart Scenes / Automation...
  • Page 20 DEVICE SCREEN The device screen is the main control screen for the dehumidifier, providing access to the controls to amend the functions of the dehumidifier Profile: Use to change the name of the dehumidifier Back: Return to the Home and amend user settings. Screen On / Off Button: Use to turn the dehumidifier On...
  • Page 21: Smart Scenes

    SMART SCENES Smart Scenes is a powerful tool providing the option to customise the operation of the dehumidifier based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two categories Scene and Automation. SCENE Scene allows for a one-touch button to be added to the Home screen.
  • Page 22: Automation

    AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, indoor temperature, humidity of the room, weather conditions, and a range of other influences. 1. Press on the Smart Scene 2.
  • Page 23: Connection Troubleshooting

    DEVICE DETAILS SCREEN The device details screen gives you the option to edit the details for the device, and use some of its additional features. The device details screen can be accessed from the device screen by pressing on the symbol in the top right hand corner.
  • Page 24: Care And Maintenance

    CARE AND MAINTENANCE Always shut off the unit and unplug from the mains before cleaning or performing any maintenance. When it is not in use for long periods it is advisable to remove the plug from the power socket. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage to the unit.
  • Page 25: Troubleshooting

    Tank is full or is not in the right position-- Empty the tank light notification and replace in the right position. Any other malfunctions will need to be reported to electriQ service centre. Do not attempt unauthorised repairs as these may invalidate the warranty.
  • Page 26: Technical Data

    During the cold cycle there should be cold air coming out of the unit. During the hot cycle hot dry air should be coming out of the outlet grill. TECHNICAL DATA Model CD12PW–V2 Voltage 220-240V~50Hz Dehumidifying capacity 12 L / day (at 30⁰...
  • Page 27: Support

    Please contact the local council for details of your local household waste recycling centres. DECLARATION OF CONFORMITY Hereby, electriQ declares that this Portable air conditioner is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.electriQ.co.uk/content/declaration-of-conformity...

Table of Contents