Daily Maintenance Checklist - Toro Reelmaster 5610-D Operator's Manual

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the safety interlock operation.
Check the brake operation.
Check the engine oil and fuel level.
Drain the water/fuel separator.
Check the air filter restriction indicator.
Check the radiator and screen for debris.
Check unusual engine noises.
Check unusual operating noises.
Check the hydraulic system fluid level.
Check the hydraulic filter indicator.
Check hydraulic hoses for damage.
Check for fluid leaks.
Check the tire pressure.
Check the instrument operation.
Check the reel-to-bedknife adjustment.
Check the height-of-cut adjustment.
Check all grease fittings for lubrication.
Touch-up damaged paint.
Wash the machine.
1. Check the glow plug and injector nozzles if hard starting, excess smoke, or rough running is noted.
2. Check with the engine running and the oil at operating temperature
3. Immediately after every washing, regardless of the interval listed
Notation for Areas of Concern
Inspection performed by:
Item Date
1
2
3
4
5
6
7
8
Important:
Refer to your engine owner's manual and cutting unit Operator's Manual for additional
maintenance procedures.
Note:
Download a free copy of the electrical or hydraulic schematic by visiting www.Toro.com and searching
for your machine from the Manuals link on the home page.
For the week of:
1
2
3
Information
Mon. Tues. Wed.
48
Thurs. Fri. Sat. Sun.