Toro Reelmaster 5610-D Operator's Manual page 21

Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu
Menu Item
Faults
Service
Diagnostics
Settings
About
Service
Menu Item
Hours
Counts
DPF Regeneration
Inhibit Regen
Parked Regen
Last Regen
Description
Contains a list of the recent
machine faults. Refer to the
Service Manual or contact your
authorized Toro distributor for
more information on the Faults
menu and the information
contained there.
Contains information on the
machine such as hours of
use counters and other similar
numbers.
Displays the state of each
machine switch, sensor and
control output. You can use
this to troubleshoot certain
issues as it quickly tells you
which machine controls are on
and which are off.
Allows you to customize and
modify configuration variables
on the InfoCenter display
Lists the model number, serial
number, and software version
of your machine
Description
Lists the total number of hours
that the machine, engine and
PTO have been on, as well
as the number of hours the
machine has been transported
and service due
Lists the number of starts,
cutting unit/PTO cycles, and
fan reversals the machine has
experienced
The diesel particulate filter
regeneration option and DPF
submenus
Use to control reset
regeneration
Use to initiate a parked
regeneration
Lists the number hours since
the last reset, parked, or
recovery regeneration
Recover Regen
Counts
Diagnostics
Menu Item
Cutting Units
Hi/Low Range
PTO
Engine Run
Backlap
Settings
Menu Item
Units
Language
LCD Backlight
LCD Contrast
Front Backlap Reel Speed
Rear Backlap Reel Speed
Protected Menus
Auto Idle
Blade Count
Mow Speed
Height of cut (HOC)
21
Use to initiate a recovery
regeneration
Lists numerous counts the
machine has experienced
Description
Indicates the inputs, qualifiers
and outputs for raising and
lowering the cutting units.
Indicates the inputs, qualifiers
and outputs for driving in
transport mode.
Indicates the inputs, qualifiers
and outputs for enabling the
PTO circuit.
Indicates the inputs, qualifiers
and outputs for starting the
engine.
Indicates the inputs, qualifiers
and outputs for operating the
backlap function.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or metric.
Controls the language used
on the InfoCenter*.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Controls the speed of the front
reels in backlap mode.
Controls the speed of the rear
reels in backlap mode.
Allows a person authorized
by your company with the
PIN code to access protected
menus.
Controls the amount of time
allowed before returning the
engine to low idle when the
machine is stationary.
Controls the number of blades
on the reel for reel speed.
Controls the ground speed for
determining the reel speed.
Controls the height of cut
(HOC) for determining the reel
speed.