Servicing The Engine Fuel Filter; Checking The Fuel Lines And Connections; Cleaning The Fuel Pick-Up Tube Screen - Toro Reelmaster 5610-D Operator's Manual

4. Remove the filter canister and clean the
mounting surface.
5. Lubricate the gasket on the filter canister with
clean oil.
6. Install the filter canister by hand until the gasket
contacts mounting surface, then rotate it an
additional 1/2 turn.
7. Tighten the drain plug on the bottom of the filter
canister and close the vent on the top of the
canister mount.
Servicing the Engine Fuel
Filter
Service Interval: Every 400 hours—Replace the
engine fuel filter.
1. Clean the area around the fuel-filter head
(Figure 89).
Figure 89
1. Fuel-filter head
2. Remove the filter and clean the filter-head
mounting surface
3. Lubricate the filter gasket with clean lubricating
engine oil. Refer to the engine operator's
manual, included with the machine, for additional
information.
4. Install the dry filter canister, by hand, until the
gasket contacts the filter head, then rotate it an
additional 1/2 turn.
5. Start the engine and check for fuel leaks around
the filter head.
2. Fuel filter
(Figure 89).
Checking the Fuel Lines
and Connections
Service Interval: Every 400 hours (or yearly,
Check the fuel lines and connections for deterioration,
damage, or loose connections.
Cleaning the Fuel Pick-Up
Tube Screen
The fuel pick-up tube, located inside the fuel tank, is
equipped with a screen to help prevent debris from
entering the fuel system. Remove the fuel pick-up
tube and clean screen as required.
g021576
54
whichever comes first).