Installation - D-Link VoiceCenter DPH-125MS User Manual

Section  - Installation
This section will walk you through the installation process. Use the following steps to connect the DPH-125MS IP Phone
to your Local Area Network.
1. Connect one end of the Ethernet cable to the LAN Port on the DPH-125MS IP Phone and connect the other end of
the Ethernet cable to your Local Area Network using a hub or switch.
2. Plug the power adapter into an AC outlet or power strip and plug the other in into the phone's AC input. The Power
LEDs will light up to indicate proper operation.
Once you have connected the IP Phone to your network, it should look like the diagram below.
D-Link DPH-15MS User Manual

Installation