Unpacking And Installation; System Requirements; Installation - D-Link DPH-70 User Manual

Hide thumbs Also See for DPH-70:

Table of Contents

2 Unpacking and Installation

Open the shipping carton and carefully remove all items. In addition to this User's Guide, make

sure you have received all of the following:

• Modem IP phone, DPH-70

• One telephone cable (RJ-11)

• Handset

• Handset cord

• Power adapter

• Warranty card

If any item is missing or damaged, please contact your local reseller.

You will need the following to use DPH-70.

• AC power outlet

• Local telephone line connection

• Access to dial-up Internet connection (via ISP) that is PPP compatible

• Account with a VoIP (Internet Telephone) service provider

1. Connect the handset to the DPH-70 with handset cord.

2. Plug one end of telephone cable (RJ-11) into the LINE port on the rear panel of DPH-70

and the other end into a working telephone wall jack.

3. Plug the AC power adaptor provided into an AC outlet and insert the power cord into the

connector marked "AC" on the rear panel of the device.

4. Lift the handset and listen for the dial tone that indicates the DPH-70 has been installed

properly. If you do not hear a dial tone, check that the power adaptor is plugged into a

live electrical outlet and that the power cord is pushed securely into the connector.

5. The DPH-70 is now ready for basic configuration as described in the next section.

Reminder: The DPH-70 needs Internet access and Internet calling card information to make

Internet phone calls. However, it can make normal PSTN phone calls without any configuration.

DPH-70 User's Guide

Table of Contents