Advertisement
Unpacking and Installation
Open the shipping carton and carefully remove all items. In addition to this User's Guide, make
sure you have received all of the following items:
• Modem IP phone, DPH-70E
• One telephone cable (RJ-11)
• Handset
• Handset cord
• Power adapter
• Warranty card
If any item appears to be missing or damaged, please contact your local reseller.
System Requirements
You will need the following to use DPH-70E.
• AC power outlet (230V, 50Hz)
• Local telephone line connection
• Access to dial-up Internet connection (via ISP) that is PPP compatible
• Account with a VoIP (Internet Telephone) service provider
Installation
1. Connect the handset to DPH-70E with handset cord.
2. Plug one end of telephone cable (RJ-11) into the LINE port on the rear panel of DPH-70E
and the other end into a working telephone wall jack.
3. Plug the AC power adaptor provided into an AC outlet and insert the power cord into the
connector marked "AC" on the rear panel of the DPH-70E.
4. Lift the handset and listen for the dial tone that indicates the DPH-70E has been installed
properly. If you do not hear a dial tone, check that the power adaptor is plugged into a
live electrical outlet and that the power cord is pushed securely into the connector.
5. Now DPH-70E is ready for basic configuration as described in the next section.
Advertisement
