Using The Dvc-1100; Status Icons - D-Link DVC-1100 Manual

Using the DVC-1100

Main
Window
Status
Message
Ready for call
Area
Banner
Window
After the DVC-1100 VideoPhone is setup by using the Setup Wizard, you will
see the above Main Screen each time you turn on the VideoPhone.
There is a larger Main Window that displays the self-view until a call is connected.
Once you have connected to another VideoPhone the main window displays
the party you are calling. The smaller Self-View Window then displays the
self-view.
To switch the images that are in the Main Window and Self-View Window,
press the Self/Remote button on the remote control.

Status Icons

The Status Icons appear only briefly at startup. The DVC-1100 uses these icons
to indicate its status. The icons display on the top right side of the Main Screen.
This is a list of the status icons:
Checking for i2eye updates
Obtaining the Public IP Address (Router's Address)
DVC-1100 is registering with the Directory Service
Connecting to a Wireless network
Layout of the i2eye Main Screen
Status
Icons
Main
Settings
Buttons
Privacy
Status
Icons
Self-View
Window
19