D-Link DVC-1100 Manual page 52

Using the DVC-1100 with Routers, Gateways
or Broadband Modems (continued)
Opening Ports on Your Routers and Gateways (continued)
You have now completed the entering of one port to be opened. You will need to
open six more ports.
Repeat steps A
ports: 15329, 15330, 15331, 15332 and 15333.
The last port will be opened slightly differently:
Repeat steps
Choose TCP as the Protocol Type
Enter 1720 as the Private Port and Public Port
Under Schedule, Click Always
Click Apply to complete
You have now completed the opening of the 7 ports. Your DVC-1100 is ready to
use with your router or gateway!
(Important: Not all routers and gateways are the same; please refer to your
router or gateway user manual for specific instructions on opening ports.)
through G five more times for each one of the following five
A through C on the previous page.
52