D-Link DVC-1100 Manual page 51

Using the DVC-1100 with Routers, Gate-
ways or Broadband Modems (continued)
Opening Ports on Your Routers and Gateways (continued)
How to open ports on a router
A total of 7 ports must be opened for the DVC-1100 to work with most routers
or firewalls. To open these ports, please do the following:
A. Click Enabled
B. Give the Virtual Server a Name (such as i2eye)
C. Under Private IP, enter the IP Address obtained from the
DVC-1100
D. Under Protocol Type, choose Both (TCP and UDP)
E. Under Private Port and Public Port, enter 15328
F. Under Schedule, click Always
G. Click Apply to save this entry
A
B
C
D
15328
E
15328
F
(How to obtain an IP Address from the DVC-1100:
Turn the DVC-1100 ON. Using the remote control
highlight the Settings button on the Main Screen.
Navigate to Settings>Network>Network Address
>IP Address)
G
51