Advertisement
DM /
4 TOOLS CONTROL UNIT
CONTROL UNIT
INSTALLATION
MS-A
DESOLDERING PUMP
Connectable tools: T210, T245, PA120, HT420, AP130, DR560 and DS360.
Connectable modules: MS, MV and MN.
HEAT MANAGEMENT
JBC stations intelligently manage the tool temperature:
Work mode: When the tool is used, pre-set work temperature is 350º C.
Sleep mode: When the tool is in the stand, the temperature goes down to 180º C (
Hibernation mode: After longer periods of inactivity (pre-set i.e 30 minutes), the power is cut off and the
tool cools down to room temperature.
Heat management increase tip life which reduces cost of ownership.
2
POWER CORD
DR-SC
DESOLDERING STAND
MANUAL
w w w.jbctools.com
DM
4 TOOLS CONTROL UNIT
DM-2B / DM-1B / DM-9B
CONTROL UNIT
Power Cord
Socket
depending of the configuration).
USB Connector
to PC
Advertisement
