Sending An Rms Status - Motorola MTP3250 Feature User Manual

4.3.9.3.1
Sending Targeted Status Messages
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Perform one of the following actions:
• Highlight the required status message and press the Send key.
• If the status list is empty, enter a 5-digit status message number and press Send.
4 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
• Select the required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
•
Status Sent
•
Status Failed
4.3.10

Sending an RMS Status

Prerequisites:This feature is only available when enabled by your service provider. See
Messaging System (RMS) on page 136
Procedure:
1 Perform one of the following actions:
If...
If the radio is in the
RMS mode,
If the radio is not in
the RMS mode,
NOTICE: The navigation through the radio menu is only available if your service provider
enabled the Send RMS/FMS menu item. However, your service provider can configure a
One Touch Button to display the Send RMS/FMS menu even if the navigation is not
possible.
If the radio is not in RMS Mode, and the Send RMS/FMS menu item is disabled, and no
One Touch Button is configured to display the Send RMS/FMS menu, then the radio can
only receive RMS messages but cannot send them.
2 Perform one of the following actions:
• Press and hold a required key (for RMS status 0–9).
• Press the required two keys combination (for RMS status 10–99).
for details.
Then...
go to step 2.
a Perform one of the following actions:
• From the home screen, press Menu→Messages→Send
RMS/FMS.
• Press and hold the One Touch Button configured to display
the Send RMS/FMS menu.
• Use a menu shortcut assigned to the Send RMS/FMS menu.
b Go to step 2.
68015000899-FH
Chapter 4: Main Menu
Radio
77