Emergency Alert; Emergency Mode By Dialing; Table 14: Emergency Operation Dependencies - Motorola MTP3250 Feature User Manual

68015000899-FH
Chapter 3: Modes
3.5.10

Emergency Alert

NOTICE: This is a Software Selling Feature.
This feature allows the radio to send emergency alerts to other radios within its Direct Mode Operation
(DMO) coverage by pressing the Emergency button.
Even in Trunked Mode Operation (TMO), the radio monitors a special DMO emergency frequency for
possible emergency alerts and responds to them by automatically joining the emergency call.
To initiate the emergency alert, the radio must be in MS-MS DMO mode or out of coverage in TMO
mode. The alert is not sent to the dispatch console.
To receive the emergency alert, the radio must be in DMO or TMO, within RF range of the initiating
radio, and must not be in a call. When the radio receives the emergency alert, it joins the call
automatically.
The following table illustrates the dependencies between the current radio mode and the type of
emergency operation:

Table 14: Emergency Operation Dependencies

Radio Mode
DMO, MS-MS, idle
DMO, Repeater, idle
DMO, Gateway, idle
DMO, in call
TMO, no coverage
TMO, in coverage, idle
TMO, in coverage, in call
Network Monitor, MS-MS
Network Monitor, Repeater
Gateway operation, in cover-
age
Repeater operation
3.5.11

Emergency Mode by Dialing

This feature allows you to trigger Emergency Mode by dialing a predefined number. It initiates the
same emergency services as when you use the Emergency button. Your radio can store up to eight
emergency numbers.
NOTICE: If Emergency Mode is triggered by dialing an emergency number, you can press the
End key to exit Emergency Mode.
60
Initiate Emergency
Emergency Alert
Standard DMO Emergency
Standard DMO Emergency
Per communication mode
Emergency Alert
Standard TMO Emergency
Standard TMO Emergency
Emergency Alert
Standard DMO Emergency
Standard TMO Emergency
Standard DMO Emergency
Emergency Alert Received
(Yes/No)
Yes
Yes
Yes
No
Yes
Yes
No
No
No
No
No