Targeted Status Messages; Sending An Rms Status - Motorola MTP6650 Feature User Manual

2 Select Messages→Send Status.
3 Send status messages by using one of the following options:
Option
Sending existing status messages
Sending new status messages
4.3.9.3

Targeted Status Messages

The Targeted Status Messages feature enables sending status messages to addresses that can be
selected by the user.
By default, targeted status messages can be sent to private or talkgroup addresses.
Your service provider can restrict valid addresses to numbers stored in Contacts.
NOTE: This feature is not supported on Dimetra networks.
4.3.9.3.1
Sending Targeted Status Messages
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Perform one of the following actions:
• Highlight the required status message and press the Send key.
• If the status list is empty, enter a 5-digit status message number and press Send.
4 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
• Select the required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
•
Status Sent
•
Status Failed
4.3.10

Sending an RMS Status

Prerequisites:This feature is only available when enabled by your service provider. See
Messaging System (RMS) on page 152
Actions
a Select the required status message.
b Perform one of the following actions:
• Press Select.
• Press the PTT button.
• Press the Send key.
a Enter a 5-digit status message number.
b Press Send.
for details.
MN005826A01-AE
Chapter 4 : Main Menu
Radio
81