Sending An Rms Status - Motorola MTP8550E Series User Manual

NOTICE: This feature is not supported on Dimetra networks.
4.3.9.3.1
Sending Targeted Status Messages
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Send Status.
3 Do one of the following:
• Highlight the required status message and press Select, the PTT button, or the Send key.
• If the status list is empty, enter a 5-digit status message number and press Send.
4 Highlight the required status message and press Select, the PTT button, or the Send key.
5 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
• Select required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
•
Status Sent.
•
Status Failed.
DRAFT
4.3.10

Sending an RMS Status

Prerequisites: This feature is only available when enabled by your service provider. See
Messaging System (RMS) on page 145
Procedure:
1 Do one of the following:
If...
If the radio is in the
RMS mode,
If the radio is not in
the RMS mode,
for details.
Then...
go to step 2.
a Do one of the following:
• From the home screen, press Menu → Messages → Send
RMS/FMS.
• Press and hold the One Touch Button configured to display
the Send RMS/FMS menu.
• Use a menu shortcut assigned to the Send RMS/FMS
menu.
b Go to step 2.
MN002041A01-AG (en-US)
Main Menu
Radio
79