Before Power On; Attaching The Antenna; Inserting The Sim Card - Motorola MTP3250 Feature User Manual

Description
NOTICE:
The system (SwMI) determines radio transmit and receive times, which affect the actual radio
operating time.
If the radio overheats (due to high ambient temperature or other factors), thermal protection will
reduce transmitter power, which may lead to loss of communication.
You can attach a colorful o-ring to a radio antenna to distinguish radios from one another.
An RFID knob is available as an optional accessory which allows tracking radios easily. The
knob contains an RFID tag which can be read by handheld scanners greatly enhancing the
speed of radio identification. The knob is a retrofit option and can replace an existing volume
knob.
2.2

Before Power On

Read this section before you power on your radio for the first time.
2.2.1

Attaching the Antenna

Procedure:
1 Insert the screw-in base of the antenna into the antenna terminal on the top of the radio.
2 Turn clockwise until tight.
IMPORTANT: Use only the antenna intended for the radio. Make sure that the antenna
has an operating frequency engraving and a color ring at the bottom of the thread. Use of
other antennas can result in significant range loss due to poor RF performance.
2.2.2

Inserting the SIM Card

Prerequisites:Turn off your radio before inserting the SIM card.
Procedure:
1 Remove the battery.
2 Open a plastic SIM card cover.
3 Slide a SIM card latch towards the bottom of the radio and lift the latch.
Value
05/35/60 > 22 h
68015000899-FH
Chapter 2: Getting Started
> 21 h
19