Ftp Settings - D-Link SECURICAM Network DCS-2100+ Manual

Using the DCS-2100+ with an Internet browser
(continued)
Configuration > Advanced > Mail & FTP (Continued)
SMTP account name 2 -
SMTP password 2 -
Recipient email address 2 -
Return email address -

FTP Settings

Local FTP server port -
1st FTP server -
1st FTP user name -
1st FTP password -
1st FTP remote folder -
The user name for the second SMTP server.
The password used to log into the second e-mail
account. (The password will appear as dots
instead of entered characters.)
The e-mail address of recipients for the
secondary server.
The return e-mail address to use if the
snapshot or system log e-mail fails to send.
(This address should be within the SMTP
server's domain for authentication purposes.)
It can be other than default port 21. If you find that
you want to change the port to a port number
other than 21, you will need to specify the port
when connecting to the FTP server. For example
FTP://68.5.1.81:60 (if you are to use port 60 for
your FTP server port)
The domain name or IP address of the external
FTP server. The following user settings must be
correctly configured for remote access.
Granted user name on the external FTP server.
Granted password on the external FTP server.
Granted folder on the external FTP server. The
string must conform to the external FTP server.
Some FTP servers cannot accept a preceding
slash symbol before the path if there is no virtual
path mapping. Refer to the instructions of the
external FTP server for details. The folder privilege
must be open for upload.
42