Installation Wizard (continued)
The Installation Wizard will now show a MAC address for the DCS-2100+ and
an IP address. This IP address may not be correct at this step in the installation
until you see "Yes" under the assigned column. The camera is now automatically
configured with an IP address consistent to the device it is connected to.
Select the MAC address.
Click on the
Link to Selected
Devices
button.
For more information regarding the functions of this screen, see the following
section titled "Installation Wizard Screen."
After you click on the Link
to Selected Devices
button,
Installation
Wizard will automatically
open
your
browser to the IP Ad-
dress of the DCS-2100+
in this example it is: http:/
/192.168.0.146. Your
DCS-2100+ may have a
different IP Address.
Internet
13