D-Link SECURICAM Network DCS-2100+ Manual page 111

Using IP surveillance Software (continued)
Playback Program (continued)
The items in the settings windows are:
Database location
The most important item in the settings dialog is the database
location setting. You must set it to the directory that contains the
surveillance database to make the program to work properly.
AVI file location
This sets the directory where exported AVI files will be stored.
Exported AVI files will be stored in the sub-directory (camera
name) under the directory you set here.
Snapshot file location
This sets the directory where bitmap files will be stored when
you use the snapshot to export them. Exporting bitmap files will
be stored in the sub-directory (camera name) under the directory
you set here.
Modulation Mode:
The modulation mode cannot be changed. This depends on how
you recorded the video sequence in the monitor program. If you
select the wrong mode, the video shown in the display area will
become distorted. If you have chosen the wrong modulation
mode, you may open the settings dialog again, change to the
correct mode, and restart the playback program. The display will
now be normal.
111