Technical Specifications - D-Link SECURICAM Network DCS-2100+ Manual

Technical Specifications

Remote management
Camera configuration and Camera system log can be accessed remotely via Internet
Explorer 5.x or above Web browser.
Networking
Protocol
TCP/IP, HTTP, SMTP, FTP, NTP, DNS, DHCP, DDNS, and UPnP
Ethernet
Enhanced 802.11b wireless or 10BaseT or 100BaseT Fast Ethernet auto-negotiation
WLAN
2.4Hhz 802.11b+ DSSS CSMA/CA Protocol
Bit rate: 22/11/5.5/2/1 Mbps*
Security: Up to 256-bit WEP
Antenna
2.4Ghz swivel type, monopole
Frequency
2.4Ghz-2.5Ghz
Impedance
50 Ohms nominal
Gain
2dBi typical
Video
Algorithm supported
H.263+ (MPEG-4 Short header mode)
Audio
24Kbps
8K sampling rate
Video resolution
Up to 30 fps at 160x120
Up to 30 fps at 320x240
General I/O
1 opto-isolated sensor input (max. 12VDC 50mA)
1 relay output (max. 24VDC 1A, 125VAC 0.5A)
*Maximum wireless signal rate derived from IEEE Standard 802.11b specifications. Actual
data throughput will vary. Network conditions and environmental factors, including volume of
network traffic, building materials and construction, and network overhead lower actual data
throughput rate.
135