D-Link SECURICAM Network DCS-2100+ Manual page 89

Using IP surveillance Software (continued)
Monitor Program (continued)
Video shown
Empty video box
Removing video from a display window
Step 1: Move the mouse cursor to the display window that contains the video
channel you wish to remove.
Step 2: Note that the cursor will change to the hand-shape when it has been
moved onto the displaying frame. After that, press the left mouse button and
hold it.
Step 3: Move the cursor, while still holding the left mouse button, to the trashcan
in the common area of the monitor program.
Step 4: When the cursor shape changes to an arrow-shape over the trashcan,
release the left mouse button. The video in the corresponding display window
will disappear. All operations above are shown in the figure on the following
page.
89