D-Link SECURICAM Network DCS-2100+ Manual page 131

I/O Connector (continued)
Configuring Your Camera for External Trigger Based Recording
(continued)
Click the Network button under the Advanced tab to set the SMTP or FTP
server settings for the DCS-2100+.
Click Mail & FTP
In this window, enter the settings for the SMTP or FTP server to which recorded
snapshots will be sent. For detailed information about each setting, please refer
to Configuration > Advanced > Mail & FTP in the section titled "Using the
DCS-2100+ With an Internet Browser" (page 41) Click the apply button when
finished.
131