Chapter 7: Service Mode; Service Mode Overview - Matrix E3XE - 01 Service Manual

CHAPTER 7: SERVICE MODE

7.1 SERVICE MODE OVERVIEW

The Service Mode allows an authorized service provider to test and store information on the Suspension Elliptical.
1) To enter Service Mode, press ENTER, 3, 0, 0, 1, ENTER on the upper display. Service Mode will appear on the display (Figure A).
2) Select the key next to the setting that needs to be changed, and follow the prompts to change.
3) Press the ENTER key once the desired setting is correct to save.
4) Press HOME or press and hold the STOP key for 3-5 seconds to return to normal operation. NOTE: If a setting has been changed, the
unit and console power should be reset. Cycle the power switch, and press and hold the CHANNEL UP and CHANNEL DOWN keys for 3-5
seconds to reset the console power.
FIGURE A
17