Advertisement
SUB
MAIN MENU
MENU
PRESSURE
SMOOTH
RESOLVE
PS UNITS
TIME
EXIT
REPORT
PRESSURE
TIGHTN'S
TEMP
SCREEN
CONTRAST Factory setting is 04
AUX
HEADER
SERVICE
CODE
OPTIONS / COMMENTS
OFF = normal response.
ON = slower (damped) response
LOW = e.g. 0.01mBar resolution.
HIGH = displays to an extra decimal place
mBar, mmH
O, Pa, kPa, PSI, mmHg, hPa, InH
2
LET BY = Set duration of let-by test in minutes.
Default = 1 minute
STABIL'N = Set duration of stabilisation in minutes.
Default = 1 minute
TIGHTN'S = Set duration of tightness test in minutes.
Default = 2 minute
Stored pressure tests, VIEW, DEL ALL or EXIT
(max = 20 tests)
Stored let-by and tightness tests, VIEW, DEL ALL or EXIT,
(20 tests)
Stored differential temperature tests, VIEW, DEL ALL or EXIT
(20 tests)
Enables users to customise the parameters on the AUX
display
User can set any parameter on lines 1, 2, 3 and 4
Sets printout header, 2 lines, 20 characters per line
Password protected for authorised service agents.
Leave set to 0000.
O
2
Advertisement
