Table of Contents
Advertisement
07-19
Electrical Installations
1
Renault
General information regarding the LCD display
The time and date are buffered by a 3V 210 mAh, CR2032
type button cell. If, therefore, the time should be incorrect
or the clock should stop working, this button cell must be
replaced.
It is mounted on the reverse of the circuit board
LCD display. To replace this button cell, the LCD display must
be removed from the furniture front by carefully clipping the
chrome-plated frame out of its holder. You will then see the
screws that fasten the plastic part to the furniture. Loosen
these screws to detach the display.
1
Fiat (Drive)
of the
j
When replacing the button cell, please ensure that plus
and minus are in the right direction. Incorrect polarity may
cause the display to become defect.
Advertisement
Table of Contents
