Table of Contents
Advertisement
Built-in devices
10-17
Settings menu
Start the settings menu by pressing the MENU key. The
backlight goes on and those functions that can be set will be
displayed. The control unit will switch to the idle position after
30 seconds if the screen is not operated.
Setting the desired temperature
The temperature can be set from +5 °C to +30 °C in steps of
0.5 °C.
1. The temperature shown is the temperature presently set.
2. Raise the temperature by pressing "+". Lower the tempera-
ture by pressing "–".
3. The settings are now finished and the heating will run until
the set temperature has been reached.
It is not possible to set any temperature if the daytime or
nighttime automatic system is in operation. The plus and
minus icons are then greyed out.
Advertisement
Table of Contents
