Table of Contents
Advertisement
07-11
Electrical Installations
Battery charging
After the type and capacity of the battery have been set and it
has been calibrated, the battery sensor permanently monitors
the status of the batteries (starter/ancillary battery).
The intelligent battery sensor is connected directly to the nega-
tive terminal on the ancillary battery.
Battery charging function
230V voltage applied and charger has been activated for
sensor control.
The fan can be switched on and off in this menu; the illustration
shows the fan when it is switched on.
Ancillary battery
These menus show
- the charging voltage (U)
- the charging current (I)
- the remaining time until discharge, dependent on the cap
city and the actual flow (current)
- as well as the charging status of the batteries (1/2 or 2/3).
Starter battery
Advertisement
Table of Contents
