Table of Contents
Advertisement
03-5
Chassis
3.4 Levelling supports
The levelling supports are located in the rear area by the
frame extension.
Swinging out the levelling supports
• Place the crank on the hexagon head
• Turn the crank to move the support to a vertical position.
• If necessary, secure the foot
into the ground and place it on a firm base.
• If the levelling support is in a vertical position, the support
foot will extend telescopically.
• Use the crank to level the levelling supports until the vehi-
cle stands level.
2
2
*
.
j
to prevent it from sinking
k
1
Retracting levelling supports
• Use crank to release levelling supports.
• Continue to crank smoothly until the levelling support is once
again in its initial horizontal position.
- Do not use the levelling supports as a car jack. Their sole
- Always load the levelling supports evenly (max. 500 kg per
- Always retract the levelling supports and secure them
- Clean the levelling supports regularly and grease them slightly.
The telescopically adjustable foot may only be extended
as far as the yellow marking!
purpose is to stabilise the motor home when it is parked.
support).
before driving.
Advertisement
Table of Contents
