Table of Contents
Advertisement
Switching the control panel on and off
Press the adjusting knob / pushbutton
for longer than 3 seconds.
- Previously set values / operating parame-
ters will be reactivated after the control
panel has been switched on.
- If the heating system is not supplied with
operating voltage for more than 2 hours,
the control panel will automatically switch
itself off.
- Due to an internal lag feed in the heating
system, it may take a few minutes for the
control panel to switch off.
Selecting the setting mode
Press the adjusting knob / push-
button
The display shows the setting mode.
The first icon blinks.
Changing the room temperature
Use the adjusting knob / pushbutton to select the icon in the
menu line
l
- Press to switch to the setting mode.
- Use the adjusting knob / pushbutton to select the desired temperature.
- Press the adjusting knob / pushbutton to confirm the temperature.
a
3
a = Heating
- Heating is switched on.
- Adjustable range of temperature: 5 - 30°C (in increments of 1°C)
- Use the adjusting knob / pushbutton for fast temperature changes
(on stand-by screen).
Built-in devices
10-4
Advertisement
Table of Contents
