Optional Front Bezel; Removing The Optional Front Bezel; Installing The Optional Front Bezel - Dell EMC PowerEdge R940 Installation And Service Manual

Optional front bezel

Removing the optional front bezel

Prerequisites
Follow the safety guidelines listed in
Steps
1. Unlock the bezel by using the bezel key.
2. Press the release button, and pull the left end of the bezel.
3. Unhook the right end, and remove the bezel.
Figure 20. Removing the optional front bezel with the LCD panel
Next steps
Install the optional front bezel.

Installing the optional front bezel

Prerequisites
Follow the safety guidelines listed in
Steps
1. Locate and remove the bezel key.
NOTE: The bezel key is part of the LCD bezel package.
2. Align and insert the right end of the bezel onto the system.
3. Press the release button and fit the left end of the bezel onto the system.
Safety instructions on page 29.
Safety instructions on page 29.
Installing and removing system components 31