Related Manuals for Divis ACAP Series
Summary of Contents for Divis ACAP Series
- Page 1 DiViS ACAP DVR Rev. 1.0 Hardware Installation Guide Digital Video Security System Digital Video Recorder www.divisdvr.com CHANCE-i USA Corp. *All contents of this document may change without prior notice.
- Page 2 4. Board Description 4-1. DiViS CAP120A16 4-2. I/O Board 4-3. Audio Board 5. Installation 5-1. DiViS CAP120A16 Pigtail Type 5-2. DiViS CAP120A16 Back Panel Type 6. Accessories 6-1. Back panel 6-2. Video Pigtail 6-3. Audio Pigtail 6-4. Sensor Board (16 channel) 6-5.
- Page 3 DVR board. For the software explanation, please refer to “Installation and User’s Guide”. This guide book is applicable to, among CHANCE-i’s products, DiViS CAP120A16 board. The pictures and names of the products are subject to change depending on hardware upgrade.
-
Page 4: Specification Of Divis
Each connected camera can be manipulated through the DiViS main program as long as each camera supports such capabilities. Auto Rebooting System When DiViS detects an error or malfunction within the system, it will automatically reboot the system in order to correct it. Motion Detection and Sensor Trigger Detection features make it possible to record images only when movement is detected, preserving volume space and maximizing the use of physical storage space. - Page 5 Network Support (PSTN, TCP/IP, LAN , Modem Protocol Support) DiViS supports network access, which allows administrators to login to DiViS main and remotely access all the features provided locally. POS, Access Control, ATM Support Text data from external devices (POS, Access Control, ATM, etc) can be recorded with DVR video images.
-
Page 6: Installation Notes
DiViS w w w . D V R . c o m 2. Installation Notes - Recommend to use Intel Chipset mother board. I) It might be incompatible with mobile system or special system mother board. Intel Chipset Motherboard Type... -
Page 7: Products And Components
DiViS w w w . D V R . c o m 3. Products and Components 3.1 DiViS ACAP Series Board DiViS-CAP120A16 I/O board Sound A16 board (Optional) (Optional) 3.2 Accessories Pigtail Cable Audio Cable Reset Cable 3.3 Optional Accessories Sensor Port Sensor &... -
Page 8: Board Description
DiViS w w w . D V R . c o m 4. Board Description 4-1. DiViS CAP120A16 4-2. I/O Board 4-3. Audio Board DiViS... -
Page 9: Installation
. D V R . c o m 5. Installation 5-1. DiViS CAP120A16 Pigtail Type 1) Connect Audio board with DVR board. Make sure Red line goes to the bottom. 2) Connect camera 1~8 to the BNC ports. - Page 10 DiViS w w w . D V R . c o m 5-2. DiViS CAP120A16 Back Panel Type 1) Back panel. 2) Sensor Cable. 3) When connect cable to back panel make sure to leave one pin from each end.
-
Page 11: Back Panel
DiViS w w w . D V R . c o m 6. Accessories 6-1. Back Panel Camera I/O Sensor & Relay (Digital I/O) Camera Ground 3, 5, ~ 31, 33 Sensor Input 0~15 1~16 Camera Signal 4, 6, ~ 32, 34... - Page 12 DiViS w w w . D V R . c o m 6-2. Video Pigtail Pigtail cable 1 ~ 4, 9 ~ 13: Black BNC 5 ~ 8, 13 ~ 16: White BNC 6-3. Audio Pigtail 6-4. Sensor Board (16 channel)
-
Page 13: Dip Switches
DiViS w w w . D V R . c o m 6-5. RS232 to RS422/485 Converter * Use Rx+ and Rx- for RS 485 method. - TxData + TxData - RxData + RxData Signal 1) Connect to system’s Com port. -
Page 14: Port Converter
DiViS w w w . D V R . c o m 6-6. PORT Converter 6-6-1. Specification RS-232 from POS DB9 Female Input Parallel Port from POS DB25 Male RS-232 to Printer DB9 Male Serial RS-485(S) to DVR TX(+)(-), RX(+)(-), GND... - Page 15 DiViS w w w . D V R . c o m 10, Terminal Block - TxData + TxData - RxData + RxData Signal 11, SW1, SW2: Used in output of Parallel port 12, SW3, SW4: Used in output of Serial 6-6-3.
-
Page 16: Sound Recording
DiViS w w w . D V R . c o m 6-7. Sound Recording After connecting Microphone, ensure that “Line In” and “Microphone In” is not muted in the Windows sound setting. It is required to have Direct X 8.0 or higher. - Page 17 DiViS w w w . D V R . c o m 6-7-3. 4 channel sound 1) Additional sound card is required (total 2 sound cards – 1 onboard and 1 PCI). 2) Connect “Line In” in both sound cards with included 2 channel audio cable.
Need help?
Do you have a question about the ACAP Series and is the answer not in the manual?
Questions and answers