Main Menu - Leica LS10 User Manual

Activating Tilt Check
For LS10:
Precise levelling with
the digital level
bubble step-by-step
4.5
Description
Operation
5. Accept with Cont.
If you activate the Tilt Check functionality, the instrument checks
☞
the longitudinal and transversal tilt before taking a measurement. If
the instrument needs to be levelled again, a warning message is dis-
played.
To activate or deactivate the Tilt Check functionality, tap on the
Tilt Check icon and press the softkey Page (F3). On the Check page, select
On or Off and press the softkey Cont.
The digital level bubble allows you to precisely level the instrument.
1. Centre the bubble of the circular level as described in
ment Setup, Setup
2. Turn on the instrument.
Tap on the
OR
Press the Favourites key
Level.
3. To centre the bubble of the digital
tubular level, turn footscrew C.
☞
When a checkmark is dis-
played, the instrument is
levelled sufficiently.
4. Accept with Cont.

Main Menu

The Main Menu is the starting place for accessing all functionality of the
instrument.
If desired, you can configure the instrument to start with a user-
☞
defined screen instead of the Main Menu. Refer to
tings.
For the LS15, it is recommended to define the Compass Calib applic-
☞
ation as starting screen. To allow the visualisation of levelling lines
within the office software, the compass should be calibrated on each
instrument startup.
step-by-step.
Level & Tilt Check icon.
from within any program and select
Level &
4.3 Instru-
6.1 Work Set-
29