500-Sheet Drawer (2Tm)-Sensor (Tray 4 Feed-Out) Removal - Lexmark W850n Service Manual

4024-110
2X 500-sheet drawer (2TM)—sensor (tray 4 feed-out) removal
1.
Open the 2TM/TTM left door assembly.
2.
Remove the screw securing the 2TM/TTM left door support strap (A).
3.
Remove the two screws securing the lower bracket (B).
4.
Disconnect the connector from the sensor (tray 4 feed-out) (C).
5.
Release the hooks securing the sensor (tray 3 feed-out) (C) to the lower bracket (B).
6.
Remove the sensor (tray 3 feed-out) (C).
B
4-38
Options Service Manual
Connector
C
Connector
Bottom view
Hooks
A
Left
C