Hcf Feed Roll Assembly Removal - Lexmark W850n Service Manual

HCF feed roll assembly removal

1.
Open the HCF top door.
2.
Open the HCF feed unit assembly.
3.
Push the two ends of the HCF feed roll assembly (A) inward, and move it upward in the direction of the
arrow to release it from the HCF media feed unit assembly (B).
4.
Remove the HCF feed roll assembly (A).
Note: When removing the HCF feed roll assembly (A), do not touch the rubber surface.
Front
Note: Before re-installing the HCF feed roll assembly (A), do not touch the rubber surface.
A
B
4024-110
4-143
Repair information