Duplex Media Center Transport Roll Removal - Lexmark W850n Service Manual

Duplex media center transport roll removal

1.
Remove the duplex unit assembly. See
2.
Remove the duplex controller card assembly. See
page 4-181.
3.
Remove the hooks of the two bushings (A) securing the duplex media transport center roll (B) to the duplex
unit assembly.
4.
Remove the duplex media center transport roll (B).
Note: When removing the duplex media center transport roll (B), do not touch the rubber surface.
Hook
A
Note: When replacing the duplex media center transport roll (B), do not touch the rubber surface.
"Duplex unit assembly removal" on page
"Duplex controller card assembly removal" on
B
4-154.
A
Hook
Right
Repair information
4024-110
4-191