Replacing The Battery In The Computer - VDO M1WL Installation & Operation Manual

Table of Contents

Advertisement

M1 WL
Low battery indicator
The M1 WL has a low battery warning.
The text "Computer low" appears on the display.
Press the BIKE button to acknowledge this low battery
warning.
You can keep using the cycle computer for approx. a week.
Replace the battery as soon as possible on seeing the low
battery warning.

Replacing the battery in the computer

To ensure your cycle computer is fully functional,
we recommend replacing the battery annually.
ATTENTION:
your settings, total distance and total ride time
information remain stored when you replace the battery.
NO data is lost.
You need a 3 V 2032 battery.
We recommend using a branded battery from Sony,
Panasonic, Varta or Duracell.
oPEN
cLoSE
!
The process is as follows:
3
1
STEP 1
Use a coin to remove the battery compartment cover.
STEP 2
Remove the dead battery.
ATTENTION:
Wait for 10 seconds before inserting the new
battery. The electronics need this time to recognise that the
battery is being changed.
2
10 SEc.
STEP 3
Insert the battery into the computer housing
with the +pole up.
Ensure that the battery is not tilted.
Ensure that the rubber seal lies smoothly on the lid of the
battery compartment.
STEP 4
Insert the battery compartment cover into the opening and
use a coin to turn it to right as far as it will go.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents