VDO M1WL Installation & Operation Manual page 17

M1 WL
Settings – clock
Setting the time in 12-hour AM/PM format
Press theSET button to confirm the selection "12".
The hours now flash and "am" or "pm" appears on the
display.
Press the BIKE button to set the hours.
The display information changes from "pm" to "am"
at "12".
Press the SET button to confirm the hour/AM-PM setting.
The minutes now flash on the display.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response "Set Ok" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M1 WL returns to function mode.
17