Battery Status Indicator; Replacing The Battery In The Computer - VDO M5 User Manual

M5

Battery status indicator

The VDO M5 has a low battery warning.
If the remaining battery capacity falls below a certain level,
a warning appears on the display.
Press any button to clear the warning.
Following a low battery warning, you still have
approximately two weeks to replace the battery.
You also receive low battery warnings for the
speed transmitter, heart rate transmitter and
cadence transmitter.

Replacing the battery in the computer

To ensure your cycle computer is fully functional,
we recommend replacing the battery annually.
ATTENTION:
your settings, total distance and total ride time
information remain stored when you replace the battery.
NO data is lost.
You need a 3 V 2450 battery.
We recommend using a branded battery from Sony,
Panasonic, Varta or Duracell.
How to replace the battery:
oPEN cLoSE
!
STEP 1
3 1
Use a coin to remove the battery compartment cover.
STEP 2
Remove the dead battery.
ATTENTION: Wait for 10 seconds before inserting the new
battery. The electronics need this time to recognise that the
battery is being changed.
2
STEP 3 10 SEc.
Insert the battery into the computer housing with the +pole
up. Ensure that the battery is not tilted.
Ensure that the rubber seal lies smoothly on the lid of the
battery compartment.
STEP 4
Insert the battery compartment cover into the opening and
use a coin to turn it to right as far as it will go.
55