VDO M1WL Installation & Operation Manual page 13

M1 WL
Settings – wheel circumference
Press the SET button to confirm your setting.
The final digit on the right now flashes.
Press the BIKE button to set this digit.
Press the SET button to confirm your setting.
Your wheel circumference setting is now complete.
The response "Set Ok" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M1 WL returns to function mode.
13