CrimeStopper EZEE Start EZ-30DP Operating Instructions Manual page 8

SELECTABLE HOURLY COLD-START MODE – EXITING THE VEHICLE:
1) Engine should be running with the Key. Press the Remote Start button for at least 1 second. (For EZ-30DP
model, activate Green start input wire.) Lights will turn on signaling the remote start has turned on and doors will
unlock.
2) Within 10 seconds press and release the valet/program button once for each hourly increment (1 time = 1hour,
2X = 2 hours, 3X = every 3 hours, 4X = every 4 hours).
3) Parking Lights will turn when the button is pressed and flash for each consecutive button press.
4) Turn Ignition switch OFF, remove key and exit the vehicle. Engine should remain running.
5) Once outside the vehicle, press and release the remote start button to turn off engine. (For EZ-30DP model,
activate Green Start input wire.) The parking lights will flash the number of times indicating the hourly increment
for confirmation.
6) The vehicle will start by itself at the selected hourly increment until driven with key or started via the remote
control.
REMOTE ENGINE CONTROL
PRESS FOR 1 SEC.
DOUBLE PRESS
EACH PRESS IS 1 HOUR
INCREMENTS, UP TO 4
HOURS
PARKING LIGHT
UNLOCK
OR
IGN
OFF
8