Notices RIGOL products are protected by patent law in and outside of P.R.C. RIGOL reserves the right to modify or change parts of or all the specifications and pricing policies at company’s sole decision. Information in this publication replaces all previously corresponding material.
Symbols on the Product. These symbols may appear on the product: Protective Hazardous Refer to Chassis Test Earth Voltage Instructions Ground Ground Terminal Installation Guide for RM-DM-3 Rackmount Kit...
2. At least 3U spaces (133.5mm) have to be provided by machine cabinet. 3. The depth inside the machine cabinet should not be less than 400mm. Figure 3: Dimension of Instrument with Rack Adapter Installed Installation Guide for RM-DM-3 Rackmount Kit...
Installation Procedures 1. Remove handle from instrument: grip the handle in both sides and pull it outward. Then, push the unit upward to release it from the instrument. Figure 4: Remove Handle Installation Guide for RM-DM-3 Rackmount Kit...
Page 7
Figure 5: Installation of Left and Right Plate 3. Place the instrument: aim the parallels of instrument at the corresponding openings and then put it onto the support board. Figure 6: Place the Instrument Installation Guide for RM-DM-3 Rackmount Kit...
Page 8
M4 bolts. Figure 7: Fix the Instrument 5. Mount front panel: aim the opening of front panel at the front of instrument and fix them using four M4 bolts. Figure 8: Mount Front Panel Installation Guide for RM-DM-3 Rackmount Kit...
Page 9
Figure 9: Loading into Machine Cabinet Notice The rack holds a height of 3U, and the holes those in compliance with the arrow direction are the mounting holes for rack. Figure 10: Holes for Rack Installation Guide for RM-DM-3 Rackmount Kit...
Need help?
Do you have a question about the RM-DM-3 and is the answer not in the manual?
Questions and answers