Rigol RM-1-DP700 Installation Manual

Installation Guide
RIGOL
This rack mount kit (RM-1-DP700) is designed to mount a single RIGOL DP700 series
programmable linear DC power supply into a 19-inch cabinet that conforms to the Electronic
Industries Association (EIA) standard.
Kit Part Checklist (RM-1-DP700)
No. Name Qty.
1 Right Fastener 1
2 Filler Panel 2
3 Left Fastener 1
4 Rail 2
5 M4 Screw 24
6 Bottom Plate 1
7 Side Beam Fastener 4
8 M6 Screw 12
9 M6 Nut 12
5
6
4
3
2
1
DP700 Rack Mount Kit
RM-1-DP700
Description
--
--
--
--
M4x8 Phillips Pan Head Screw
--
--
M6x16 Phillips Pan Head Screw
M6 Square Lock Cage Nut
7
5 8 9
RIGOL Installation Guide
Installation Tool
The PH2 Philips screwdriver is recommended.

Space Requirements

To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.

The available height of the cabinet should be at least 4U.

The depth of the cabinet should be at least 500 mm.

The dimensions of the rack are as shown below.

Installation Procedures

CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
1
RIGOL
Unit: mm
2