Table of Contents
Advertisement
Calling Feature Instructions:
Call Hold: Ongoing call will be put on hold after FLASH button pressed on the phone set. The
gateway will play a repeating music to the remote end.
Call Transfer: Ongoing call will be put on hold after FLASH button pressed on local phone set
(gateway plays a repeating music to the remote end). Meanwhile, local user can dial out to
another number after dial tone observed. After the handset is back on the hook, the call on hold
will then be transferred to the new call regardless of the status of the new call. If wrong number is
dialed for the new call, just press the FLASH button to get back the call on hold. In another case,
if the local user doesn't hang up the phone after new call sets up, press FLASH button to switch
between the first call and the new call. Please be informed that PBX between phone sets and the
gateway must support FLASH features to make this function work correctly. If a phone set is
connecting directly to the FXS port of the gateway and not functioning to FLASH, please adjust
the settings in "Flash Detect Time" in category "Advanced Options".
Example of a Three-Way calling:
1.
Alex dials to Bob, Bob answers that call.
2.
Alex presses Flash and call to Coral (Bob is on hold), Coral answers that call.
3.
Alex dials *61 then presses Flash, thus conference call is created.
Or
4.
Alex dials to Bob, Bob answers that call.
5.
Coral dials to Alex (Call Waiting), Alex presses Flash to pick the second call and talk to
Coral.
6.
Alex dials *61 then presses Flash, thus conference call is created.
39
Advertisement
Table of Contents
