Backyard Discovery SOMERSET 65012 Owner's Manual page 43

STEP 12
INSERT (2) 1/4" T-NUTS INTO INSIDE SURFACE OF M7 AND M11 WALL BOARD, AS SHOWN.
NEXT, ATTACH EA HANDLE GRIP TO M7 WALL BOARD USING (2) 1" PTH BOLTS, LOCK
WASHERS AND FLAT WASHERS, AS SHOWN.
USING HANDLE GRIP AS A TEMPLATE, PILOT DRILL USING A 1/8" DRILL BIT AND ATTACH
THE SECOND EA HANDLE GRIP TO E2 UPRIGHT USING (2) 1-1/2" TAPPING SCREWS, LOCK
WASHERS AND FLAT WASHERS, AS SHOWN.
ATTACH THE REMAINING (2) EA HANDLE GRIPS TO (2) M11 FACE BOARDS USING (4) 1" PTH
BOLTS, LOCK WASHERS AND FLAT WASHERS, AS SHOWN.
M11
M11
(4)
EA - HAND GRIP YELLOW PLASTIC - A100043
BOLT PTH
(6)
1/4x1
WASHER
(8)
FLAT 9x18
(2)
T-NUT 1/4
M7
EA
SCREW
(2)
TAPPING
14x1-1/2
WASHER
(8)
LOCK INT
8x15
E2