Backyard Discovery SOMERSET 65012 Owner's Manual page 35

K1 - ROOF SWING BEAM SUPPORT - W100682
(1)
5/8"x5 1/4"x51 5/8" (16x134x1310)
K5 - FLOOR RAIL - W103705
(1)
5/8"x5 1/4"x30" (16x134x762)
STEP 3
USING A HAMMER, INSTALL (4) 5/16" T-NUTS INTO THE HOLES PROVIDED ON THE
INSIDE OF K1 ROOF SWING BEAM SUPPORT AND (2) 5/16" T-NUTS INTO THE HOLES
PROVIDED ON THE OUTSIDE SURFACE OF K1 SUPPORT, AS SHOWN.
ATTACH (2) M5 FACE BOARDS TO THE EDGES OF BOTH E2 FORT UPRIGHTS USING (6)
1-1/2" WOOD SCREWS, AS SHOWN.
ATTACH L3 GROUND BOARD TO THE EDGES OF BOTH E2 FORT UPRIGHTS AND
THROUGH HOLES PROVIDED IN M5 BOARDS USING (4) 2-1/2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
ATTACH M10 SAFETY BOARD TO THE EDGES OF BOTH E2 FORT UPRIGHTS AND
THROUGH HOLES PROVIDED IN M5 BOARDS USING (2) 2-1/2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
ATTACH M9 ANGLE BRACE TO L3 AND M10 BOARDS USING (2) 1" BOLTS, LOCK
WASHERS AND 5/8" BARREL NUTS, AS SHOWN.
ATTACH K5 FLOOR RAILS TO THE EDGES OF BOTH E2 FORT UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
ATTACH K1 SUPPORT TO THE EDGES OF BOTH E2
FORT UPRIGHTS AND FLUSH TO TOP EDGES OF E2
UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
K1
M9 - ANGLE BRACE - W100696
(1)
5/8"x3 3/8"x35 5/8" (16x86x904)
M5 - FACE BOARD - W101599
(2)
5/8"x3 3/8"x43 1/8" (16x86x1094)
M10 - SAFETY BOARD - W100701
(1)
5/8"x3 3/8"x33 7/8" (16x86x860)
L3 - GROUND BOARD - W101602
(1)
5/8"x4 3/8"x46 7/8" (16x112x1191)
LAG SCREW
(6)
WH 5/16x2 1/2
BOLT WH
(2)
5/16x1
WASHER
(2)
LOCK EXT
12x19
NUT BARREL
(2)
WH 5/16x5/8
K5
M10
E2
L3
LAG SCREW
(8)
WH 5/16x2
SCREW PFH
(6)
8x1 1/2
WASHER
(16)
LOCK EXT
8x19
(6)
T-NUT 5/16
K1
E2
M5
M9