Basic Operation - Turbo Air TST-28SD-D2 Installation And Operation Manual

BASIC OPERATION

REFRIGERATORS
1. The controller(thermostat) is located at the right inside of the unit.
2. The factory setting for the control is 'Normal'.
3. Set toward 'Cool' for higher temperature and 'Cold' for lower temperature.
4. The thermostat controls compressor's on/off by sensing inside temperature.
OFF
NORMAL
COLD
Temperature Controller
(Thermostat)
- If thermostat knob is pointing at OFF, compressor and condenser fan
motor would no run.
- Keep unit unplugged, if not in use for a long period of time.
8