Authentication And Encryption - Oce cx2100 User Manual

Authentication and encryption

Most wireless networks use some kind of security settings. These security settings define the authentication
(how the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the
network). If you do not correctly specify these options when you are configuring your Océ wireless MFP, it
will not be able to connect to the wireless network. Therefore care must be taken when configuring these
options. Please refer to the information below to see which authentication and encryption methods your Océ
wireless MFP supports.
Authentication methods
The cx2100 supports the following methods:
Open system
Wireless devices are allowed access to the network without any authentication.
Shared key
A secret pre-determined key is shared by all devices that will access the wireless network.
The cx2100 uses the WEP keys as the pre-determined key.
WPA-PSK/WPA2-PSK
®
Enables a Wi-Fi Protected Access Pre-shared Key (WPA-PSK/WPA2-PSK), which enables the Océ
wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK encryption (WPA-Personal).
LEAP
®
Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. which
uses user ID and password for authentication.
Encryption methods
Encryption is used to secure the data that is sent over the wireless network. The cx2100 supports the
following encryption methods:
None
No encryption method is used.
WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity check and re-
keying mechanism.
AES
AES (Advanced Encryption Standard) is Wi-Fi
CKIP
The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.
Configuring your machine for a wireless network
®
authorized strong encryption standard.
3
3
3
3
23