Crestron MK-QM-RMCRX Installation Manual page 6

Mounting Kit
Bottom Bracket Mounting
NOTE: An Allen wrench is required to tighten the ¼"-20 screws.
4
● Mounting Kit: MK-QM-RMCRX
1. Mount the bottom bracket of the MK-QM-RMCRX to the
QM-RMCRX PEM nuts using the four #6-32 screws and
spacers provided.
2. Secure the assembly to the customer-supplied pole by using
the top bracket and the two ¼"-20 screws and washers
provided.
Crestron MK-QM-RMCRX
#6-32 SCREW
BOTTOM
BRACKET
#6 SPACER
TOP OR SIDE
COVER OF
QM-RMCRX
PEM NUTS
Installation Guide- DOC. 6247