Crestron D3 PRO Reference Manual page 94

Software
90 • Crestron D3 Pro™
The Unassigned devices on the network list displays all the touch-settable devices
that D3 Pro has detected on the network. You can click Find All Unassigned
Devices to poll the network again and refresh the list. The information here includes
the current internal Cresnet ID of the device, its type, the type count and serial
number. As you set valid Cresnet IDs for these touch-settable devices, they will be
removed from this list.
To set IDs, drag the devices you want to configure from the Unassigned devices in
the program list down to the configuration list (called the Touch list). Alternatively,
you can select a device and click Add Selected Item. Or you can select all the
devices that belong to one location by clicking Add Selected Location.
Crestron D3 Pro
Reference Guide – DOC. 5998a
™