Crestron D3 PRO Reference Manual page 77

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
2. Press F2 to rename the variable and the variable states to meaningful terms.
For example, the name of the variable might be FrontGateStatus, and the
variable states could be Open and Closed.
3. You can create as many variable states as required. Simply click the New
button under Variable States. For example, you could add another variable
state for FrontGateStatus called Offline. You can also change the order of
variable states by clicking the up and down arrows.
4. To delete a variable or variable state, select the item you want to remove and
click the Delete button under that window.
5. Click OK to exit.
At system startup, the value of all global variables defaults to the zero state.
6. To set the value of the variable, expand the "Variables" device in the Target
list and select the variable. Then select the variable state from the Command
list.
Software
Crestron D3 Pro™• 73